HYPERLINK http//www.wombaroo.com.au/images/wom_teats.jpg o Click Here for a Larger View of this Picture
Click to Enlarge
A wide range of latex teats are available with a sleeve to fit bottles with a neck diameter of 18-24mm. The 120 mL plastic bottle has graduations in mL and fl. oz., that fit these teats.
HYPERLINK http//www.wombaroo.com.au/Teat20selection.htmClick here for available teat shapes and suggested uses
Size of Hole
There is no hole in the teats, so the carer can make a hole to suit the age of the animal. Pierce the tip of the teat with a hot needle to make a hole about 1 mm in diameter, or for large animals, cut a hole with scissors. If the hole is too small, excessive sucking will quickly weaken the tip and the end will blow out. If this is happening then the hole is probably too small for the animal. Make a larger hole. The hole should be large enough for milk to drip out slowly, when the bottle is inverted.
Small animals can be fed using a syringe with a teat pulled over the end, to give greater control of milk flow with the plunger. Guidance should be obtained from experienced carers on correct feeding technique for different animals.
Care and Storage